Skip to content
The Futures Controller Alpha Series Quad fins are the key to unlock the potential in your wide tailed groveller surfboard.
The large area and pronounced rake of the front fins gives plenty of drive while the much smaller and upright rear fins give enough control while allowing the board to pivot almost before you've initiated the turn! The Alpha Series fins are constructed in Huntington Beach, California from a lightweight and resilient moulded carbon fibre delivering all the performance you’d expect from a fin set with a Balanced Ride Number.
Compound 6 is Futures brand-new construction blend which is lighter than Honeycomb and the next step in innovation for Futures.
Constructed with Infused carbon fibre which is lighter and stronger than fibreglass, and then infused with air! Futures hooked up with 3M, and were able to develop a totally unique composite material with air pockets thereby reducing weight without sacrificing any structural strength.
Different surface geometries were tested behind a jet-ski, which resulted in a more predictable and efficient flow and a significant reduction in "fin hum."
With the added durability and strength of carbon fibre, Futures were able to go back to the drawing board and set about restructuring the profile geometry of the Alpha line. The strength of the fibres allowed them to modify the flex pattern by reducing the material at the tip for more spring and adding a little at the base for more drive.
This is a must-have fin template for any wide tail hybrid or groveller surfboard.
The large area and pronounced rake of the front fins gives plenty of drive while the much smaller and upright rear fins give enough control while allowing the board to pivot almost before you've initiated the turn! The Alpha Series fins are constructed in Huntington Beach, California from a lightweight and resilient moulded carbon fibre delivering all the performance you’d expect from a fin set with a Balanced Ride Number.
Compound 6 is Futures brand-new construction blend which is lighter than Honeycomb and the next step in innovation for Futures.
Constructed with Infused carbon fibre which is lighter and stronger than fibreglass, and then infused with air! Futures hooked up with 3M, and were able to develop a totally unique composite material with air pockets thereby reducing weight without sacrificing any structural strength.
Different surface geometries were tested behind a jet-ski, which resulted in a more predictable and efficient flow and a significant reduction in "fin hum."
With the added durability and strength of carbon fibre, Futures were able to go back to the drawing board and set about restructuring the profile geometry of the Alpha line. The strength of the fibres allowed them to modify the flex pattern by reducing the material at the tip for more spring and adding a little at the base for more drive.
This is a must-have fin template for any wide tail hybrid or groveller surfboard.